亚洲午夜成人片-日韩人妻无码系列专区-国产第一页浮力影院入口-宅男宅女精品国产av天堂

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Industry information

當(dāng)前位置:

首頁(yè) News Industry information

Operating rules of injection molding

Release time:2024-05-29

Our friends who struggle in the production line know itInjection moldingThere are some operating rules. We should know that safety is the primary productive force.


Injection molding machine is a complex machine with high temperature, high pressure and fast operation. The operator often neglects for a while, causing irreparable physical injury, and regrets for life. Every step of the operation of the injection molding machine is dangerous, especially when opening and locking the mold. In order to avoid danger, the operator must pay attention to the following details of safe operation during injection molding:

2.jpg


1. The injection molding factory shall keep the injection molding machine and its surrounding environment clean at all times. The space around the injection molding machine shall be kept as unobstructed as possible. After adding lubricating oil or pressure oil, the leaked oil shall be wiped clean as soon as possible. Before turning on the electric heating, please clean up the sundries (such as rubber particles) on the glue melting cylinder to avoid fire. If the machine is not overhauled or necessary, the heat insulation protective cover on the glue melting cylinder shall not be removed at will.


2. Before injection molding, check whether the mold locking can be terminated by pressing the emergency button or opening the safety door during operation.


3. When the shooting platform moves forward, it is not allowed to remove the deep glue leaked from the shooting nozzle by hand, so as to avoid pinching your hand between the shooting platform and the mold, causing physical injury. When cleaning the barrel, adjust the temperature of the nozzle to the appropriate high temperature, keep the nozzle unobstructed, and then use a lower injection pressure and speed to remove the residual rubber in the barrel. When cleaning, do not directly touch the newly injected rubber with your hands to avoid scalding.


4. Avoid placing heat sensitive and corrosive plastics in barrels for too long, and strictly follow the closing and cleaning methods provided by the plastic supplier. When replacing plastics, it is necessary to ensure that the new and old plastics will not produce chemical reaction after mixing (for example, if POM and PVC are mixed and heated successively, toxic gases will be produced); Otherwise, other plastics must be used to remove residues from the barrel.


5. Do not cancel the safety door or safety switch in order to improve the production speed. Before injection molding, check whether the mold is firmly installed on the moving template and head plate of the injection molding machine. Pay attention to whether the ground wire and other wiring of the injection molding machine are firmly connected.


6. When installing the mold, the lifting ring must be completely screwed into the mold lifting hole before lifting. After the mold is installed, the length of the safety rod of the injection molding machine should be adjusted according to the size of the mold, so that when the safety door is opened, the machine safety stop (mechanical lock) can fall down to prevent the mold locking of the injection molding machine.


7. During the normal injection molding process, it is strictly forbidden for the operator to take out the injection molded parts from above or below the injection molding machine without opening the safety door. In case of mold maintenance or temporary shutdown, the oil pump motor of the injection molding machine should be shut down in time.


8. Injection molding can be operated by one person, and multiple people are not allowed. It is strictly forbidden for one person to operate the control panel while the other person adjusts the mold or does other operations at the same time.


Every operator of the injection molding plant should keep the above regulations in mind and ensure production safety while creating benefits.

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
主站蜘蛛池模板: 6080yyy午夜理论片中无码| 狠狠色婷婷久久综合频道毛片| 人妻少妇中文字幕乱码| 337p西西人体大胆瓣开下部| 潮喷大喷水系列无码久久精品| 97久久超碰国产精品旧版| 欧美丰满熟妇xx猛交| 中文精品久久久久国产网址| 国产性猛交╳xxx乱大交| 狠狠躁日日躁夜夜躁2022麻豆| 天天躁人人躁人人躁狂躁| av综合网男人的天堂| 成熟丰满熟妇高潮xxxxx| 无遮挡国产高潮视频免费观看| 人善交vide欧美| 国产在线一区二区三区av| 98色精品视频在线| 久久精品国产亚洲av果冻传媒| 乱码午夜-极品国产内射| 永久免费av无码网站韩国毛片 | 亚洲欧洲日韩国内高清| 日日躁夜夜躁狠狠躁| 97久久久久人妻精品区一| 国产乱人伦中文无无码视频试看 | 中文av无码人妻一区二区三区| 无码国模产在线观看免费| 亚洲成av人片一区二区三区| 亚洲爆乳www无码专区| zps无套内射视频免费播放| 中国人妻与老外黑人| 影音先锋中文字幕无码资源站| 色偷偷亚洲第一综合网| 亚洲日韩国产成网在线观看| 曰韩内射六十七十老熟女影视| 久久久综合九色合综国产精品| 久久久久亚洲av无码专区| 99精品国产高清一区二区| 久久久久亚洲av成人无码电影| 国产精品无码久久av| 东北女人毛多水多牲交视频| 久久www免费人成_看片中文|