亚洲午夜成人片-日韩人妻无码系列专区-国产第一页浮力影院入口-宅男宅女精品国产av天堂

Welcome to Shenzhen Zhongyuan Plastic Co., Ltd!

News



Tel:(0755)27151698
Fax:(0755)27150611
Mailbox:szzyzcl@163.com / szzy@szzy99.com
Add:Building A1 and A2, No.1 Industrial Zone, yuliu property company, Gongming town, Bao'an District, Shenzhen
Industry information

當前位置:

首頁 News Industry information

Design essentials of injection molding parts

Release time:2024-04-09

stayInjection moldingIn the process, due to the uneven cooling and shrinkage of plastic in the mold cavity and the unreasonable structural design of injection molded parts, it is easy to cause various defects of products: shrinkage, weld marks, pores, deformation, galling, top injury, flash.


In order to obtain high-quality injection molded products, the structural manufacturability of products must be fully considered in the design. Next, combined with the main structural characteristics of injection molding products, the methods to avoid injection molding defects are analyzed.

圖片6.png


1、 Mold opening direction and parting line

At the beginning of each injection product design, the mold opening direction and parting line should be determined first, so as to minimize the influence of the core pulling mechanism and the parting line on the appearance. So pay attention to the key points.

1. After the mold opening direction is determined, the stiffener, buckle, bulge and other structures of the product should be designed to be consistent with the mold opening direction as far as possible, so as to avoid core pulling, reduce the suture, and extend the service life of the mold.

2. For example, the mold opening direction of the bumper is generally the body coordinates χ If the mold opening direction is designed as χ If the shafts are inconsistent, the included angle must be indicated in the product drawing.

3. After the mold opening direction is determined, the appropriate parting line can be selected to improve the appearance and performance.


2、 Demoulding slope

1. Proper demoulding slope can avoid product galling. The demoulding slope of smooth surface should be greater than 0.5 degrees, that of fine grained surface should be greater than 1 degree, and that of coarse grained surface should be greater than 1.5 degrees.

2. Proper demoulding slope can avoid damage to the top of the product.

3. When designing products with deep cavity structure, the slope of the outer surface should be less than that of the inner surface, so as to ensure that the mold core does not shift during injection molding, obtain uniform product wall thickness, and ensure the material density and strength of the opening of the product.


3、 Product wall thickness

1. All kinds of plastics have a certain wall thickness range, generally 0.5~4mm. When the wall thickness exceeds 4mm, it will cause problems such as too long cooling time and printing. We should consider changing the structure of the product.

2. Uneven wall thickness will lead to surface reduction.

3. Uneven wall thickness will cause pores and weld marks.


4、 Stiffener

1. Reasonable application of stiffeners can increase the rigidity of products and reduce deformation.

2. The thickness of the stiffener must be less than 1/3 of the product wall thickness, otherwise the surface will be reduced.

Copyright: Shenzhen Zhongyuan Plastic Co., Ltd. | mold processing customized manufacturer. If you want to know the processing price of the factory, how much is it, and which is good, please contact us Yue ICP Bei No. 17060480
主站蜘蛛池模板: 日韩精品无码专区免费播放| 精品人妻一区二区三区浪潮在线| 久久青青草原亚洲av无码| 77777亚洲午夜久久多人| 亚洲色欲久久久综合网| 少妇高潮太爽了在线观看| 亚洲国产成人精品无码区花野真一 | 久久婷婷五月国产色综合| 九九精品成人免费国产片| 国产精品宾馆在线精品酒店| 四虎成人精品在永久免费| 国产精品午夜小视频观看| 成人久久免费网站| 丰满人妻被两个按摩师| 久久婷婷五月综合色欧美蜜芽| 久久精品国产99国产精品亚洲| 亚洲av无码专区国产不卡顿| 粗长挺进新婚人妻小怡| 把腿扒开让我添个痛快| 欧美疯狂做受xxxx高潮小说| 真实国产乱子伦精品视频| 精产国品一二三产区| 亚洲国产成人精品无码一区二区| 国产精品久久久久久| 欧美疯狂做受xxxx高潮| 午夜精品一区二区三区在线观看| 欧美金发尤物大战黑人| 日韩人妻无码一区二区三区99| 一本色综合久久| 两个人看的视频www| 国产成人亚洲综合| 欧美96在线 | 欧| 久久久久亚洲av片无码| 国产影片中文字幕| 私人家庭影院5777| 亚洲色欲色欲www在线播放| 无遮挡午夜男女xx00动态| 琪琪的色原网站| 国产思思99re99在线观看 | 人妻夜夜爽天天爽三区丁香花| 国产精品高清网站|